MENU
Logo Made in Germany
presented by Logo BMWi
in cooperation with Logo AUMA
Key-Visual Trenchless Middle East 2017

Trenchless Middle East 2017

13 – 14 March 2017 – Dubai, United Arab Emirates

Meet 15 German companies

10th Exhibition & Conference on NDRC (Trenchless) Technology

Trenchless Middle East 2017
13 - 14 March 2017
Dubai, United Arab Emirates


Welcome to the German Pavilion at the Trenchless Middle East 2017!

For the Federal Republic, economic cooperation with other countries and people is important, and is the reason for Germany's participation in this event. The Federal Republic of Germany enables through this official presentation 15 companies to take part in a joint pavilion "made in Germany".

The German Pavilion will provide a good overview on the further development of techniques for trenchless methods and the rehabilitation of supply and sewage lines. All interested persons are invited to visit the German Pavilion, which will be located in The Jumeirah Beach Conference & Exhibition Centre.

There was a lot of effort put in preparing the booth. A communication and informational lounge area will enable interesting conversations and discussions. The object is to explain Germany's latest techniques and to exchange trends or experiences and to support international cooperation within the economy.

On behalf of the German exhibitors the Federal Ministry for Economic Affairs and Energy (BMWi), the Association of the German Trade Fair Industry and the German Society for Trenchless Technology e.V. (GSTT) welcome you to the Official German Presentation at the Trenchless Middle East 2017.

Exhibitors at the German Pavilion

Products

iMPREG GmbH
iMPREGLiner
Booth number: 29

Down2earth
Microtunnelling machines
Booth number: 12

Aurum Pumpen GmbH Business Unit Slurry Pumps
AURUM PUMPEN // Habermann KB 100
Booth number: 25

SAERTEX multiCom GmbH
SAERTEX-LINER Pressure
Booth number: 20

Rädlinger primus line GmbH
Composition of the Primus Liner
Booth number: 11

Schauenburg MAB GmbH
Separation Plant MAB 500 C
Booth number: 8

View all German exhibitors and products

News & Innovations

mts Perforator - NEW PBA205
mts Perforator has designed and manufactured a new generation of PBA 205. This thrust boring machine is used for construction of sewage lines and is equipped with a 205 ton jacking force for steerable pipe jacking up to 1,050 mm OD. An optimum performance is obtainable in a 3.2m diameter shaft w... | Further reading

GRUNDODRILL 18ACS with Cable Guided Detection System
Now possible with cable guided (wire line) detection system Whenever walk-over systems encounter their maximum operating limits, or if it‘s impossible to use (for example), under railway lines, then cable guided (wire-line) detection for the pilot bore is now an option. The cable-guided ... | Further reading

GRUNDORAM APOLLO, one of the largest and most powerful pipe ramming machines in the World!
GRUNDORAM pneumatically driven pipe ramming machines are used for the dynamic installation of steel pipes underneath roads, waterways, railway tracks, parks, etc. over lengths of up to 80 m. The TT ramming technology provides thrust forces up to 40.000 Nm, enabling the economic installation of o... | Further reading

News & Innovations
Your personal organizer

Your personal organizer

Print list  |  Save as PDF
This is your personal organizer to manage your contacts to the German exhibitors.